Stella SW DA
The Stella SW DA It is the most important of Shimano as regards the spinning Saltwater.
In fact, the Stella SW d Shimano is equipped with the Technology x Protect, which guarantees exceptional protection from water infiltrations without reducing the fluidity of rotation.
The body of the Star reel, theHagane Body, And extremely rigid To eliminate the flexions and for transform each action into power Without any dispersion.
Thanks to a special treatment, i SA-RB bearings of Stella SW D they are very resistant to the corrosion, salt and sand, perfect when looking for reliability and durability.
The Stella SW DA It is the most important of Shimano as regards the spinning Saltwater.
In fact, the Stella SW d Shimano is equipped with the Technology x Protect, which guarantees exceptional protection from water infiltrations without reducing the fluidity of rotation.
The body of the Star reel, theHagane Body, And extremely rigid To eliminate the flexions and for transform each action into power Without any dispersion.
Thanks to a special treatment, i SA-RB bearings of Stella SW D they are very resistant to the corrosion, salt and sand, perfect when looking for reliability and durability.
Technical specifications
Stella SW DA
STLSW8000PGD
Recovery report: 4.8: 1
Max Drag: 25 kg
Weight: 635 g
Green capacity (MM-M): 0.285-410, 0.33- 300, 0.37-250
Recovery for crank lap: 92 cm
Climb length: 75 mm
Bearings: 12+1
Spare coil: 14a8z
STLSW8000HGD
Recovery report: 5.6: 1
Max Drag: 25 kg
Weight: 630 g
Green capacity (MM-M): 0.285-410, 0.33- 300, 0.37-250
Recovery for crank lap: 107 cm
Climb length: 75 mm
Bearings: 12+1
Spare coil: 14a8z
STLSW10000PGD
Recovery report: 4.8: 1
Max Drag: 25 kg
Weight: 680 g
Green capacity (MM-M): 0.405-300, 0.47-210, 0.52-160
Recovery for crank lap: 99 cm
Climb length: 80 mm
Bearings: 12+1
Spare coil: 14A3J
STLSW10000HGD
Recovery report: 5.6: 1
Max Drag: 25 kg
Weight: 680 g
Green capacity (MM-M): 0.405-300, 0.47-210, 0.52-160
Recovery for crank lap: 116 cm
Climb length: 80 mm
Bearings: 12+1
Spare coil: 14A3J
STLSW14000XGD
Recovery report: 6.2: 1
Max Drag: 25 kg
Weight: 684 g
Green capacity (MM-M): 0.405-330, 0.47-240, 0.52-195
Recovery for crank lap: 134 cm
Climb length: 80 mm
Bearings: 12+1
Spare coil: 14a69
Characteristics:
-Hangane Gear: through Cold Forging technology, you have the same feeling of pleasure and fluidity that you feel when you use a new reel, perpetuated over time .. On the teeth of the Drive Gear no cut is carried out. The entire surface is in fact calculated in detail through a special 3D design and made thanks to the Shimano cold forging technology.
- X Ship: it is a combination of characteristics that work together to create greater efficiency. Thanks to the positioning of the pignon near the center of the large -sized Gear drive, more power is transferred from the crank to the rotor. The pigno is also supported by two A-RB Shimano bearings. This creates more stability, fluidity and power.
- Hagane Body: it is the body of the reel with a very high rigidity. The stiffness of the material of the body and the resistance to impacts virtually eliminate the flexions of the body, which means transforming the actions of the fisherman into power without this being dispersed: efficiency by power.
- Infinity Loop.
- Infinity X Ross.
- Infinity Drive: it is the new construction technology that makes the rotation more fluid both in charge and in the absence of load.
- Heatsink Drag: it is the evolution of the traditional X Tough system and manages the heat efficiently according to two logics. The first, the heat is released through the Heat Sink panel on the bottom of the coil, increasing the power of the clutch by 50%. The second, an insulating sheet was positioned between the braking mechanism and the surface of the coil, lowering the temperature of the coil itself 30%.
- Silent Drive: renewed design of the 11 internal parts of the reel for a completely silent and harmonious recovery.
- Anti Twist Finn.
- X Shield: thanks to reliable sealing seals positioned in the necessary points, including the reel body and the clutch cap, every possible passage of water or blocked. This double protection provides high reliability and durability for the SW star even if used in extreme sea conditions.
- X Protect: a contact type water resistant structure is used for large spinning reels that require resistance to higher infiltration resistance. By physically interrupting the sea water entry route with a low -scrarling element, high resistance performances are obtained by not suppressing the fluidity of rotation. Extended protection with bearings and roller guide roller, in particular the part reaching a degree of protection equivalent to IPX8.
-X Tough Drag: the clutch system of the new SW star has progressed enormously in terms of robustness, sliding and operating performance.
- XX Tough Drag: each disc is made of metal and carbon. They are of greater diameter and have been installed both on the upper and on the lower side of the coil. Consequently, the performance of the clutch are extremely fluid and stable and have been improved thanks to resistance to heat and durability.
- AR-C Spool.
- Rigid Support Drag: Eliminates the vibrations and movements of the coil. The result is an incredibly regular clutch even cin Extra Light settings.
- Cross Carbon Drag.
- Sa-RB.
- One-Piece Bail: the Monopezzo archet has no spaces where the thread can get stuck during the Fishing. Made of stainless steel, it reduces friction and allows the thread to quickly reach the roll.
